Back
   
 
Speaker - K-30A16B-2

Dynamic speakermicro speaker

Frequency Response Curve

Spec.
ITEM   SPECIFICATIONS
1 Type Dynamic speaker
2 Dimension External diameter 29.8 mm
3 Rated Input Power 0.5 W
4 Max. Input Power 0.6 W (Short time )
5 Impedance 16 ohm ¡Ó 15% at 2 KHz
6 Resonance Frequency (Fo) 660 Hz ¡Ó 20% at Fo, 1V
7 Sensitivity (S.P.L.) 88dB(0.1W/0.1m) ¡Ó 3 dB at AVE 1.0K ¡V 2.0K Hz.
    94dB(0.5W/0.1m) ¡Ó 3 dB
8 Frequency Range Fo ¡V 10K Hz
9 Total Harmonics Distortion Max 8 % at 1 KHz,0.5W.
10 Voice Coil Diameter 10.2 mm
11 Magnet Rare earth permanent (Nd-Fe-B) magnet £X9.5 x 1.5mm
12 Weight 3g ¡Ó 0.5g
13 Appearance Should not exist any obstacle to be harmful to normal operation; damages, cracks, rusts and distortions, etc.
14 Operation Test Must be normal at program source 0.5W
15 Buzz, Rattle, etc. Should not be audible at 2.83V sine Wave between Fo to 20KHz
16 Polarity When positive voltage is applied to the terminal marked (+), diaphragm should move to the front.
17 Terminal Strength Capable of withstand 1kg load for 30 seconds without resulting in any damage or rejection.
18 Temperature Operating temperature: -20¢J to +60¢J
    Storage temperature: -30¢J to +70¢J